Enerpan's new Tank Panel system has been designed from the ground up to specifically meet the mechanical challenges presented by insulating a LIQUID storage tank
Enerpan's Tank panels use a single Aluminum face for better shape conformation, while our special crimped joint and cable system provides a seal that stays water-tight, yet gives during thermal expansion. The type of insulation used is furthermore customized to the operating temperature of the tank.
| Functional Specs | |
|---|---|
| Exoskeleton |
3105-H14 Aluminum Sheet, .024 inch thick Single face, stucco embossed |
| Insulating Core |
Flexible polyurethane foam, foil backed, and/or Mineral Wool 1.5-4 inches thickness, panels can be ordered in 1/2 inch increments |
| Width |
24 inches Both edges are fully lipped with Enerpan crimp-seal joint |
| Length |
48 feet max Panel length is manufactured to customer specification |
| Finish |
Silicone modified polyester in 30 colors Interior surfaces sealed with a corrosion-resistant epoxy clearcoat |
| R-Value | 7.8 per inch of thickness |
| Technical Specs - Foam | |
| Temperature range |
up to 120 ºF Mineral wool is used for temperature ranges which exceed 120 ºF |
| Support |
Cable system No support rings required |
| Environmental Data |
HCFC Free compliant ASTMC 1289 Type 1 |
| Technical Specs - Mineral Wool | |
| Temperature range | 120 ºF + |
| Support | Support rings required |
| Max Service Temperature |
1200 ºF / 650 ºC ASTM C 411 |
| Dimensional Stability |
1.49% (linear shrinkage at 650 ºC) ASTM C 356 |
| Moisture Resistance |
0.01% moisture sorption ASTM C 1104 |
| Thermal Resistance |
4.0 hr.ft ².F/Btu (R-Value/inch @ 75 ºF) 0.71m² K/W (RSI value/25.4 mm @ 24 ºC) ASTM C 518 (C 177) |
| Lifespan | 20 years + |